Edge Scout-320

Edge Technologies introduces Scout 320 Magazine Bar Feeder

FEATURES: SCOUT 320

  • Bar diameter capacity: 3 mm to 27 mm (.118” to 1.062”)

  • Automatic loading magazine — 8 linear inches of rack capacity

  • Double pusher, space saving design

  • Polyurethane Quick Change guide channel — noise & vibration dampening

  • Hydrodynamic support via high volume oil flow into channels

  • Mitsubishi motion control — dependable and user friendly, allows easy bar feeder parameter changes-belt drive unit

  • Dual anti-vibration devices—one internal to the bar feeder, the other mounted between the telescopic nose and the lathe headstock

  • (1) Guide channel set to be chosen by customer. Several sizes to choose from, each handling a specific stock range. See chart below (spindle liner required if channel set is not lathe’s max capacity)

  • (1) Standard telescoping front nose matched to the guide channel set

  • (1) O.D. bar stock collet (to be chosen by customer, specific collet needed for each stock diameter)

  • Swiss headstock synchronization device

  • Automatic remnant retraction, self centering gripper

  • Custom lathe cable and interface plugs

 



Technical Specifications: Scout 320

 

Bar diameter capacity-no bar preparation:

3 mm to 25.4 mm (.118” to 1.000”)

Bar diameter capacity-with bar preparation:

3 mm to 27 mm (.118” to 1.062”)

Maximum bar length:

3800 mm (12 feet 5 inches)

Maximum remnant length:

420 mm (16.500”)

Magazine rack capacity:

8”

Bar loading cycle time:

35 seconds for 12-foot bar

Material straightness specification:

.007” TIR/foot of material (V blocks, 3 points equidistant)

Feed force (pusher torque):

max 450 N, adjustable

Forward feed rate:

1400 inches/minute max, adjustable

Return feed rate:

2360 inches/minute max, adjustable

Power consumption:

1.5 kW – (2 kVA)

Operating voltage:

230V/60Hz 3-phase

Control voltage:

24V DC

Oil capacity:

46 liters (12 gallons)

Oil viscosity:

ISO 100 cST

Compressed air supply:

6 bar (90 psi)

Compressed air consumption:

approx. 8 liters per loading cycle

Machine weight:

926 lbs

 






Channel

Pusher Ø

Min

Max

Max Bar With Remnant Ejection

8

7.5

3mm (.118”)

6.4mm (.250”)

7mm (.275”)

11

10

3mm (.118”)

9mm (.354”)

10mm (.393”)

14

12

3.2mm (.125”)

11mm (.437”)

13mm (.512”)

16

15

5mm (.196”)

12.7mm (.500”)

15mm (.594”)

18

16

5mm (.196”)

14.2mm (.562”)

17mm (.669”)

20

18

8mm (.315”)

18mm (.709”)

19mm (.750”)

22

20

8mm (.315”)

19mm (.750”)

21mm (.826”)

24

23

8mm (.315”)

20mm (.787”)

23mm (.905”)

28

25

10mm (.393”)

25.4mm (1.000”)

27mm (1.062”)